{"product_id":"scale-tinker-electronics-digital-dash","title":"Scale Tinker Electronics Digital Dash","description":"\u003cp data-path-to-node=\"1,0\"\u003eThis is a scale version of the well-known Tinker Electronics dash we all know and love in the full-scale world. Built around a crisp \u003cb data-path-to-node=\"1,0\" data-index-in-node=\"133\"\u003e1.5-inch screen\u003c\/b\u003e, it features fully active live readouts and a separate competition timer screen activated right from your throttle.\u003c\/p\u003e\n\u003cp data-path-to-node=\"1,1\"\u003eThese units are completely plug-and-play: just plug the included Y-harness into your Channel 2 receiver port, connect your ESC to one side of the Y, and plug the dash into the other. You're ready to run!\u003c\/p\u003e\n\u003cp data-path-to-node=\"1,2\"\u003eChoose between side or top LED positions based on the product photos. Mounting can be done using double-sided tape, or via two 2mm mounting holes in the rear of the bezel. The screen can also be removed from the housing for custom flush-mounting (similar to the final photo).\u003c\/p\u003e\n\u003cp data-path-to-node=\"1,3\"\u003e\u003ci data-path-to-node=\"1,3\" data-index-in-node=\"0\"\u003eNote: The dash will remain in demo mode if your transmitter is powered off.\u003c\/i\u003e\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"1,5\"\u003e🖥️ Touch Screen Controls\u003c\/h3\u003e\n\u003cul data-path-to-node=\"1,6\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,6,0,0\"\u003e\u003cb data-path-to-node=\"1,6,0,0\" data-index-in-node=\"0\"\u003e1-Second Hold (Main Dash):\u003c\/b\u003e Switches from the Main Race Dash over to the Timer Screen.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,6,1,0\"\u003e\u003cb data-path-to-node=\"1,6,1,0\" data-index-in-node=\"0\"\u003e3-Second Hold (Timer Screen):\u003c\/b\u003e Switches back from the Timer Screen to the Main Race Dash.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,6,2,0\"\u003e\u003cb data-path-to-node=\"1,6,2,0\" data-index-in-node=\"0\"\u003eShort Tap:\u003c\/b\u003e Toggles the countdown timer between Play and Pause.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,6,3,0\"\u003e\u003cb data-path-to-node=\"1,6,3,0\" data-index-in-node=\"0\"\u003eSwipe Right (\u0026gt; 50 pixels):\u003c\/b\u003e Resets the timer back to 06:00 (Only functions while on the Timer Screen and while the timer is paused).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"1,8\"\u003e🎮 Throttle \u0026amp; Timer Rules\u003c\/h3\u003e\n\u003cul data-path-to-node=\"1,9\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,9,0,0\"\u003e\u003cb data-path-to-node=\"1,9,0,0\" data-index-in-node=\"0\"\u003eThrottle Screen Switch:\u003c\/b\u003e Pull the throttle forward 3 rapid times within 1.5 seconds from the Main Race Dash to automatically switch over to the Timer Screen.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,9,1,0\"\u003e\u003cb data-path-to-node=\"1,9,1,0\" data-index-in-node=\"0\"\u003eNeutral Requirement:\u003c\/b\u003e You must return the trigger to neutral (\u0026lt; 5% deadzone) between each of the 3 pulls so holding the trigger down won't accidentally trigger the switch.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,9,2,0\"\u003e\u003cb data-path-to-node=\"1,9,2,0\" data-index-in-node=\"0\"\u003e5-Second Post-Switch Lockout:\u003c\/b\u003e After switching to the Timer Screen, the throttle is locked out from auto-starting the timer for 5 seconds to give you time to center your trigger.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,9,3,0\"\u003e\u003cb data-path-to-node=\"1,9,3,0\" data-index-in-node=\"0\"\u003eAuto-Resume:\u003c\/b\u003e When the timer is paused on the Timer Screen, pulling the throttle forward (\u0026gt; 5%) will automatically start or resume the countdown.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,9,4,0\"\u003e\u003cb data-path-to-node=\"1,9,4,0\" data-index-in-node=\"0\"\u003eAuto-Pause:\u003c\/b\u003e If the timer is running and you leave the throttle at neutral (\u0026lt; 5%) for more than 10 seconds, the timer will automatically pause itself.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"1,11\"\u003e⚙️ Troubleshooting \u0026amp; Inversion\u003c\/h3\u003e\n\u003cp data-path-to-node=\"1,12\"\u003eIf you need to invert the readout for forward and reverse:\u003c\/p\u003e\n\u003col start=\"1\" data-path-to-node=\"1,13\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,13,0,0\"\u003eDisconnect your motor wires first (the three wires running to the motor).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,13,1,0\"\u003eTurn on your transmitter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,13,2,0\"\u003eHold the trigger down and power on the dash. The screen will flash, and your throttle logic will be inverted.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-path-to-node=\"1,14\"\u003e\u003ci data-path-to-node=\"1,14\" data-index-in-node=\"0\"\u003eAlternatively, you can tune your ESC to swap motor directions and then reverse your throttle on your transmitter.\u003c\/i\u003e\u003c\/p\u003e","brand":"ElevatedDesign","offers":[{"title":"Classic Top Mock Led","offer_id":67750398427412,"sku":null,"price":75.0,"currency_code":"USD","in_stock":true},{"title":"Side Mock Led","offer_id":67750398460180,"sku":null,"price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/4920\/6036\/files\/ScaletinkerdashSideled2.jpg?v=1792559187","url":"https:\/\/elevated3ddesigns.com\/products\/scale-tinker-electronics-digital-dash","provider":"ElevatedDesign","version":"1.0","type":"link"}